Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG 20% | PETG 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| touareg_cubby_bracket_v2.step | Mount / bracket | 50.6 KB STEP | Slice file | Slice file | Slice file | Print with the bottom face down to avoid supports |
| touareg_cubby_bracket_v2_15deg.stl | Mount / bracket | 155.6 KB STL | Slice file | Slice file | Slice file | Print with the bottom face down to avoid supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
VW Touareg tablet mount for dashboard cubby lid
Shared by
3DPrintedCarPartDescription
This is a bracket you can mount to the back of a tablet, such as an iPad Mini 4, that can hook onto the Touareg's dashboard cubby lid. This was designed for a Touareg T4 (2015-2017), but may also work on older models such as the T3. Please let me know if you confirm that it does work on other models. Attaching the bracket to the tablet could be done with Velcro as I did, or foam tape, etc. The best way to print this is by standing it up on the bottom face so that the holes are printed vertically, this way you will not need any supports. You'll probably want to use PETG over PLA if you'll be leaving it in a hot vehicle. Overture PETG works well for me. Let me know how it works for you. For me it turned out to be a pretty simple solution. Video: https://youtu.be/n1o45Tzy-xY
Compatible Cars
Originally published on thingiverse.com by Random Dood (randomdood) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
