W639 Viano Vito Galaxy S5 Smartphone Holder - image

Files (1)

Handyhalter.stl

STL

334.3 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

20g

Based on 25% main infill across listed model files

Material cost

$0.48

Filament only at roughly $24/kg PETG / ASA

Print time

34m–56m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Handyhalter.stl	Primary model	334.3 KB STL	18g $0.44	20g $0.48	43g $1.04	Ensure a clean and level print bed for optimal adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

W639 Viano Vito Galaxy S5 Smartphone Holder

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a very simple smartphone holder for the Mercedes W639 Viano / Vito. It's designed for Samsung Galaxy S5 with S-View Cover and the original SAP V3/V4 bluetooth cradle. Advantages: - zero installation effort, no tools required, no drilling,... - the smartphone covers the annoying bright LED on the cradle - use the cradle's USB port for charging the smartphone Installation: - put the 3 pins into the original holder's 3 whole - attach the cradle to the connector (the cradle keeps the holder in place) - open the S-View cover and fold it to the phone's back - put your phone into the holder Future idea: integrate Qi charger into the holder (not sure if the cradle provides enough current).