Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Wheel center cap Mitsubishi
Shared by
3DPrintedCarPartDescription
Wheel center cap with the Mitsubishi logo. I printed mine with a black base and a blue logo to suit the blue PHEV emblem and too discreetly stand out. The logo and the base are two independent pieces held in place by a retaining ring on the inside. This makes it easy to print the logo and base in different colours. The parts can be printed rough and still have a nice surface fininsh since it's the underside of the prints that are the visible surfaces of the completed wheel cap. No need for support! The downside of the design is the limiting to a complete flatness of the external surface.
Compatible Cars
Originally published on thingiverse.com by Magnus Nilsson (Maacknus_Design) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
