Washer_Fluid_Cap..stl

STL

826.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 35%	100% solid	Recommendation
Washer_Fluid_Cap..stl	Cover / cap	826.6 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Windshield washer fluid bottle cap - Tesla Model 3

0 downloads30 views0 likes

Shared by

Verified

Description

I printed it in PLA, 100% infill. If you printed in PLA it should only be used in cooler climates as PLA can warp in hot summer weather.

Published Jun 29, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Leon Loo (lloo) · License: CC0

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.