Files (3)

bottom_with_holes_repaired.stl

STL

4.6 MB

peg.stl

STL

93.8 KB

head_with_holes.stl

STL

2.6 MB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
bottom_with_holes_repaired.stl	Printable file	4.6 MB STL	Slice file	Slice file	Slice file	Ensure proper alignment of pegs and holes for assembly
peg.stl	Printable file	93.8 KB STL	Slice file	Slice file	Slice file	Ensure proper alignment of pegs and holes for assembly
head_with_holes.stl	Printable file	2.6 MB STL	Slice file	Slice file	Slice file	Ensure proper alignment of pegs and holes for assembly

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Wolf Head Shift Knob

0 downloads169 views0 likes

Shared by

Michael Chen

Verified

Description

Remade this as shift knob for my '05 Nissan Sentra SER Spec-V update: cut the head off and gave it supports as well as alignment holes. Now there's a top with holes and a bottom with holes and a peg (you'll need two) to put them together. The supports are decent, mine needed a little bit of file work after removal so everything was smooth to the touch. took about 5 minutes. The alignment of the pegs/top/bottom is perfect. I'm quite happy with it. It's much easier to print and the finish quality is much higher in a vertical alignment. Oh yeah and in the two piece version I pinned his ears back because they were rubbing the palm of my hand raw. Now it is much nicer to use. Printed in Blue PETG and has survived a 90deg summer day in my all black car.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Published Mar 8, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

BMW

3.0K

License: CC BY

View & download STL files