Files (4)

WRX_Plate_Delete_-_Full.stl

STL

35.2 KB

WRX_Plate_Delete_-_Full_No_Holes.stl

STL

36.2 KB

WRX_Plate_Delete_-_Small.stl

STL

34.8 KB

WRX_Plate_Delete_-_Small_No_Holes.stl

STL

35.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
WRX_Plate_Delete_-_Full.stl	Printable file	35.2 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
WRX_Plate_Delete_-_Full_No_Holes.stl	Printable file	36.2 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
WRX_Plate_Delete_-_Small.stl	Printable file	34.8 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
WRX_Plate_Delete_-_Small_No_Holes.stl	Printable file	35.2 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Front Bumper

WRX Front License Plate Delete

0 downloads60 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A front license plate delete for 2008-2014 Subaru WRX. Mine's a 2014, and I believe every year back to 2008 should be the same. If not, please let me know. I haven't tried printing the full version, but it should fit perfectly since the design it's remixed from was a perfect fit. I just don't have a printer large enough to make it, and my friend who has one moved away. I'd love some feedback if anyone makes the full version. The version with no holes would need to be glued or attached with double-sided tape. The version with holes just needs two screws. I'm not sure on the side, I just used two I had laying around.