X-Grip RAM mount for BMW vehicles - image

Files (1)

BMW_Mount_1.2.stl

STL

465.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ABS / ASA 20%	ABS / ASA 25%	100% solid	Recommendation
BMW_Mount_1.2.stl	Mount / bracket	465.4 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent the part from detaching during printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

X-Grip RAM mount for BMW vehicles

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Takes a 50mm M10x1.25 bolt and a RAM ball mount (M10x1.50) to allow mounting pretty much anything the RAM mount system will allow. Strongly recommend printing in ABS, no warranties express or implied, use your best judgement to keep your phone, GPS, Gameboy, Whatever, safe and sound. Don't stare at your phone if you should be staring at anything else.