XRAD'S DISCO 2 Gauge Surround Retainer - image

Files (1)

Guage_retainer_D2.stl

STL

3.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Guage_retainer_D2.stl	Primary model	3.6 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

XRAD'S DISCO 2 Gauge Surround Retainer

0 downloads49 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Broken gauge pod cover lock tabs on your Discovery 2?? If you still have some of the original tab left, this may help you.... The wider 10mm part of retainer faces the metal clip, and the angled edges towards the driver. Fix in place with some 2 part devcon plastic welder..... Print vertically at.1 or.2 mm, gives the best grooves.