Z31 Bezel
Files (6)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
stephen s (lonewolph)Designers selling from the US, Canada, the UK, the EU/EEA (except Iceland), Switzerland and Gibraltar can also list separate original designs for sale and receive 80% of the listing price, paid out by Stripe in your local currency (conversion fees may apply). Claiming credits you here; it doesn't put this imported part up for sale.
Description
Update: I added the Double Din Piece, it's not perfect but should do the job, this will all require some good post fab to make it look and fit correctly This is a Bezel Replacement for a 1980's Z31 300ZX. It should fit all Z31. You will need a bed size of at least the size of a CR10. I am trying to design it so the center piece can be interchanged with a Single Din, Double Din, or the Raspberry Pi Official TouchScreen, if you choose to add a CarPi to it. The Button Holes are for 19mm Buttons. (you may need to drill them out a bit at the end) I have one wired to my Electric Engine Fan as a failsafe if the thermostatic fan control fails, and One to Turn My Cabin Fan on for the Heater. I removed the AC for my vehicle but if requested I can add a third button hole version. I do not plan to make a version that will incorporate the original climate control box. https://www.amazon.com/gp/product/B07D2CFLT1/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 The Hole for the USB Charger/Cigarette Lighter is around 1.12 inches. https://www.amazon.com/gp/product/B0773HL69S/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 The Pieces are made to be glued together. I recommend a strong epoxy or super glue + baking soda (Or hot glue gun) The "Z" logo can be added if necessary and I may create more variations. You may want to print in PETG, as PLA might melt/warp on a hot summer day. Overall When complete it will likely need some post processing to get it looking the way you want it to. When attaching it in the car dont over-tighten the screws as it may crack the Bezel. I hope it will be use to you.
Compatible Vehicles
Originally published on thingiverse.com by stephen s (lonewolph) · License: CC BY 4.0
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Verified by drivers
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Comments (0)
Part lists
Ask the community about this part
Start a fitment, printing, or design discussion with this part already attached.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
