1936_ford_horn_button_button.stl

STL

192.8 KB

1936_ford_horn_button_v2.4.stl

STL

206.6 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

17g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.40

Filament only at roughly $24/kg PETG / ASA

Print time

29m–48m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
1936_ford_horn_button_button.stl	Printable file	192.8 KB STL	15g $0.36	16g $0.39	36g $0.86	Ensure the model is oriented to minimize supports
1936_ford_horn_button_v2.4.stl	Printable file	206.6 KB STL	15g $0.37	17g $0.40	37g $0.88	Ensure the model is oriented to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

1936 ford horn button

0 downloads482 views0 likes

Shared by

Verified

Description

not particularly functional but aesthetically fairly accurate to the horn button on a 1936 ford truck. hope this is useful to somebody.

Published Jun 30, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Cade Stead (Arcade3145) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.