← Back to Browse Parts
Files (1)
06_Ford_Fusion_Dash_Button.stl
STL
25.3 KBPrint guidance estimate
Estimated from part metadata
Print cost & setup estimate
Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.
1 model file
Recommended kit
9g
Based on 25% main infill across listed model files
Material cost
$0.23
Filament only at roughly $24/kg PETG / ASA
Print time
16m–27m
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| 06_Ford_Fusion_Dash_Button.stl | Primary model | 25.3 KB STL | 9g $0.21 | 9g $0.23 | 21g $0.50 | Ensure proper printer calibration for accurate fit |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Knobs/Buttons
2006 Ford Fusion Dash Compartment Button
0 downloads279 views0 likes
Description
Replacement button for the dash compartment of a 2006 Ford Fusion. As long as your printer is properly calibrated this part will fit and function right off the print bed.
Compatible Cars
Published Jul 3, 2026Updated Jul 15, 2026
Originally published on thingiverse.com by Joshua Bishop (DeadShot3D) · License: CC BY
Verified by drivers
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Loading fitment proof…
Sign in to share fitment proof, installed photos, and material notes.
Comments (0)
Part lists
Save this part to named public or private collections. Public lists can be shown on this part page.
Related Parts
Finding specific fitment/category matches first.
