Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
1985 Toyota MR2 AW11 Mk1a Radio Mounting Panels
Shared by
3DPrintedCarPartDescription
These plates are designed to mount a BOSS 625UAB to the center console radio hole of my 1985 Toyota MR2. My car did not come with any sort of radio in the hole, and there were just a bunch of loose wires and 4 holes that would hold up the mounting hardware if I had it. The screw holes are inset to fit the right size screw flush with the surface, but I don't know what the screw size is since the guy from Tacoma Screw didn't write the part number on the sample bag that he gave me for the free screws (shoutout to Tacoma Screw). If you have a different radio then you may need to adjust hole positioning/size or drill holes with a power drill, but if you do that then these brackets should in theory fit any single-din radio since the flanges allow them to mount to the center console mount holes.
Compatible Cars
Originally published on thingiverse.com by Too Legit (fbicantholdmedown) · License: All Rights Reserved
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
