Files (6)

Angle_Ring.stl

STL

39.1 KB

Angle_Ring_v3.step

STEP

12.5 KB

Vent_Pod_A.stl

STL

205.1 KB

Vent_Pod_B.stl

STL

300.2 KB

Vent_Pod_v6.step

STEP

107.5 KB

Vent_Pod_v6_testA_v16.step

STEP

121.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

6 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Angle_Ring.stl	Printable file	39.1 KB STL	Slice file	Slice file	Slice file	Ensure proper ventilation when printing with PETG or ASA
Angle_Ring_v3.step	Accessory piece	12.5 KB STEP	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Vent_Pod_A.stl	Printable file	205.1 KB STL	Slice file	Slice file	Slice file	Ensure proper ventilation when printing with PETG or ASA
Vent_Pod_B.stl	Printable file	300.2 KB STL	Slice file	Slice file	Slice file	Ensure proper ventilation when printing with PETG or ASA
Vent_Pod_v6.step	Printable file	107.5 KB STEP	Slice file	Slice file	Slice file	Ensure proper ventilation when printing with PETG or ASA
Vent_Pod_v6_testA_v16.step	Printable file	121.9 KB STEP	Slice file	Slice file	Slice file	Ensure proper ventilation when printing with PETG or ASA

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Vents

1995-1999 Dodge Neon Vent Pod

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Vent Gauge Pod for 1995-1999 Dodge Neons. Work in progress that I haven't had time to really dial in. It's definitely usable, but just something I couldn't create and sell. Hoping others will use and tweak as they see fit. Looking to keep 1st gen Neons supported as there are less and less on the roads. Created in Fusion 360 when I just started to learn fusion, file could be cleaned up.