Toyota GR Yaris Vent Pod for Gauge - image

Files (2)

VentPod-52mm.stl

STL

4.7 MB

VentPod-60mm.stl

STL

3.1 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
VentPod-52mm.stl	Printable file	4.7 MB STL	Slice file	Slice file	Slice file	Ensure proper ventilation when printing
VentPod-60mm.stl	Printable file	3.1 MB STL	Slice file	Slice file	Slice file	Ensure proper ventilation when printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Vents

Toyota GR Yaris Vent Pod for Gauge

1 downloads65 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Needed somewhere to mount my Wideband in the GR Yaris. Included is a design for a 52mm and 60mm Gauge depending on what you have. I use a rubber band around the gauge to locate it in the cup. Pictured is the 52mm gauge for RHD. Assuming if you mirror the object it will also work for LHD.:-).