Cable Clip - Magnetic - Toyota Camry 2012 Air Vent - image

Files (5)

Bolt_Head.stl

STL

920.7 KB

Cable_Mount.stl

STL

419.2 KB

Cable_Mount_Cap.stl

STL

22.2 KB

Clip.stl

STL

358.4 KB

Thread.stl

STL

584.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

5 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Bolt_Head.stl	Printable file	920.7 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal print quality and minimal supports
Cable_Mount.stl	Mount / bracket	419.2 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal print quality and minimal supports
Cable_Mount_Cap.stl	Cover / cap	22.2 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Clip.stl	Clip	358.4 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal print quality and minimal supports
Thread.stl	Printable file	584.6 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal print quality and minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Vents

Cable Clip - Magnetic - Toyota Camry 2012 Air Vent

0 downloads49 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Magnetic cable clip for phone charging cable to be mounted on an air vent in a 2012 Toyota Camry. UPDATE 09/22/2019: Verified fits 2017 Nissan Frontier Downloadable Fusion 360 Link: https://a360.co/30iZpAL Feel free to customize and upload or design your own from scratch. Non-3D-printed Parts: Cable Ties (x2) 10 mm x 4 mm black disc magnet (x2) * I found these magnets in my house. I have no idea where they came from. I could not find a good link for them. * Potential untested alternate: 10 mm x 4 mm disc magnets Problems: * Unidentified magnets * Pulled too hard on one of the cable ties and snapped part of one of the cable tie holes * Originally designed for 4 mm charging cable, but adjustments were made elsewhere in which I didn't realize that Fusion automatically adjusted the charging cable channel to 6 mm diameter. Other than that, the device holds well. I'm pretty happy with it.