1996-2000 Toyota Rav4 Cup Holder preview

Files (1)

Bottle holder rav4 main.stl

STL

84.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 15%	100% solid	Recommendation
Bottle holder rav4 main.stl	Mount / bracket	84.3 KB STL	Slice file	Slice file	Slice file	Print in two separate parts and glue together for added strength

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

1996-2000 Toyota Rav4 Cup Holder

0 downloads4 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

PETG or ASA

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

15% infill for a balance between durability and weight

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

Public Domain

Commercial use allowed

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

This is my cup holder for my 1999 RAV4. It installs to the passenger side seat bolt. I have printed it using Bambu Labs PETG HF using 15% infill in two separate parts, then glued together with JB-WELD plastic bonder. Seems sturdy enough to hold a full 1L water bottle through rough roads. I dont reccomend that you print it with PLA as it gets brittle or soft in harsher temperatures that easily are found inside a car. This is my first model on this website. Any feedback is appreciated.