1996 GMC Suburban 7.4L spark plug wire clips - image

Files (8)

Wire_clip_double.stl

STL

283.4 KB

Wire_clip_double_mirror.stl

STL

283.4 KB

Wire_clip_quad.stl

STL

279.3 KB

Wire_clip_quad_mirror.stl

STL

279.3 KB

Wire_clip_single.stl

STL

299.8 KB

Wire_clip_single_mirror.stl

STL

299.8 KB

Wire_clip_triple.stl

STL

282.4 KB

Wire_clip_triple_mirror.stl

STL

282.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

8 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Wire_clip_double.stl	Clip	283.4 KB STL	Slice file	Slice file	Slice file	Verify final orientation and support decisions in your slicer
Wire_clip_double_mirror.stl	Clip	283.4 KB STL	Slice file	Slice file	Slice file	Verify final orientation and support decisions in your slicer
Wire_clip_quad.stl	Clip	279.3 KB STL	Slice file	Slice file	Slice file	Verify final orientation and support decisions in your slicer
Wire_clip_quad_mirror.stl	Clip	279.3 KB STL	Slice file	Slice file	Slice file	Verify final orientation and support decisions in your slicer
Wire_clip_single.stl	Clip	299.8 KB STL	Slice file	Slice file	Slice file	Verify final orientation and support decisions in your slicer
Wire_clip_single_mirror.stl	Clip	299.8 KB STL	Slice file	Slice file	Slice file	Verify final orientation and support decisions in your slicer
Wire_clip_triple.stl	Clip	282.4 KB STL	Slice file	Slice file	Slice file	Verify final orientation and support decisions in your slicer
Wire_clip_triple_mirror.stl	Clip	282.4 KB STL	Slice file	Slice file	Slice file	Verify final orientation and support decisions in your slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

1996 GMC Suburban 7.4L spark plug wire clips

0 downloads29 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

These are spark plug wire clips sized for 8.5mm wires for the 7.4L (454ci) engine. These are installed in a 1996 GMC Suburban K2500, but are appropriate for several model years. The wire clips keep the spark plug wires from bouncing around and keep the spark from "leaking" into the frame (for example). They mount on the factory stands, replacing the originals. The originals are around 6-6.5mm, these are 8.5mm, for example SMD spark plug wires (as seen here). These print with no supports, no brim.