GM 13 250 620 - Opel Cooling System Tube Holder - image

Files (2)

GM_13_250_620_Holder_Half.stl

STL

205.7 KB

GM_Holder_13_250_620_whole.stl

STL

381.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 40%	100% solid	Recommendation
GM_13_250_620_Holder_Half.stl	Mount / bracket	205.7 KB STL	Slice file	Slice file	Slice file	Scale the model 10x (1000%) for the exact size
GM_Holder_13_250_620_whole.stl	Mount / bracket	381.9 KB STL	Slice file	Slice file	Slice file	Scale the model 10x (1000%) for the exact size

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

GM 13 250 620 - Opel Cooling System Tube Holder

0 downloads25 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a copy of original GM part 13 250 620 used for coolant tube fixing on Opel Corsa D with 1.0, 1.2, 1.4 liter Twinport engines. There is two versions of design - half-cut, which is easier to print, and one-piece option which will require some supports while printing. I've made two halves and then just glued them together. Original part is made of PA-66, so it may be more temperature resistant than ABS, I've used. Remember that working conditions of this part include high temperature (below 100 C I think).!USE A 10x (1000%) SCALE FOR EXACT SIZE!