Opel/Vauxhaul Corsa C Windshield Water Cap - image

Files (1)

Opel_Corsa_Utility_Water_Cap_v1.stl

STL

142.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Opel_Corsa_Utility_Water_Cap_v1.stl	Cover / cap	142.8 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Opel/Vauxhaul Corsa C Windshield Water Cap

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Opel/Vauxhaul Corsa C Windshield Water Cap for my 2008 Opel Corsa Utility. I printed one from thingiverse that just doesn't fit, I created this one to fit snug inside the hole instead of over the lip, it does go in rather tight, but that's the way I wanted this. You could scale it down probably 0.5mm if you prefer.