Files (2)

1998_Saab_900_visor_clip_v1.stl

STL

138.4 KB

1998_Saab_900_visor_clip_v2.stl

STL

148.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
1998_Saab_900_visor_clip_v1.stl	Clip	138.4 KB STL	Slice file	Slice file	Slice file	Use a brim or raft for better adhesion if necessary
1998_Saab_900_visor_clip_v2.stl	Clip	148.1 KB STL	Slice file	Slice file	Slice file	Use a brim or raft for better adhesion if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

1998 Saab 900 sun visor clip

0 downloads28 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a sun visor clip for my vehicle, a 1998 Saab 900. There are two versions. Version 1 looks more like the original part, but became loose on very hot days. Version 2 is more bulky and so far is withstanding the heat much better. Make sure to use a temperature resistant material like ABS or PETG. https://voussoir.net/writing/saab_visor_clip