Files (1)
Based on 35% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 35% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| 2007_VW_New_Beetle_Convertible_Seat_Trim_v3.stl | Primary model | 349.5 KB STL | 19g $0.44 | 23g $0.56 | 44g $1.06 | Use a brim or raft for better adhesion if necessary |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
1999-2010 VW New Beetle Convertible seat belt trim
Shared by
3DPrintedCarPartDescription
1999-2010 VW New Beetle Convertible seat belt trim: I have a 2007 VW Beetle convertible and it was missing the driver's side seatbelt trim. However, I could not find it anywhere unless buying the whole side panel. Print with any "heat resistant" material, I suggest PETG or ABS. Infill: Does not matter Supports: Yes, Set it to zigzag with 5% filling. Sand, prime, paint and apply coat for better results:).
Compatible Cars
Originally published on thingiverse.com by Diego Vanni (diegohv) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
