72 Beetle, Interior Door Handle Trim - image

Files (1)

interior_trim.stl

STL

80.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
interior_trim.stl	Primary model	80.6 KB STL	Slice file	Slice file	Slice file	Ensure a clean and dry print bed for optimal adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trim Pieces

72 Beetle, Interior Door Handle Trim

1 downloads64 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

So, I put new panels in my bug yesterday, but I overshot the cutouts for the handles by just a little bit. So, it left for an unsightly thing. So, I whipped up a couple trim pieces, and printed them using a body matched color that I magically had around. Voila. I think it adds a lot to the interior of the car (full door photo attached), so I thought I would share it. Just print as you wish, and install behind the existing cover. I made custom window crank trim as well... in two colors. If you want those, let me know.. However, they are somewhat specific to the cranks.