Files (7)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Mazda_3_MPS_BK.stl | Printable file | 8.8 MB STL | 23g $0.56 | 25g $0.61 | 56g $1.33 | Ensure proper orientation of parts, especially brakes, for correct assembly |
| Rear_axle.stl | Printable file | 98.1 KB STL | 4g $0.09 | 4g $0.10 | 9g $0.22 | Ensure proper orientation of parts, especially brakes, for correct assembly |
| Brakes_Front.stl | Printable file | 83.9 KB STL | 4g $0.09 | 4g $0.10 | 9g $0.21 | Ensure proper orientation of parts, especially brakes, for correct assembly |
| Brakes_Rear.stl | Printable file | 92.5 KB STL | 4g $0.09 | 4g $0.10 | 9g $0.22 | Ensure proper orientation of parts, especially brakes, for correct assembly |
| Front_axle.stl | Printable file | 99.9 KB STL | 4g $0.09 | 4g $0.10 | 9g $0.22 | Ensure proper orientation of parts, especially brakes, for correct assembly |
| Wheels.stl | Printable file | 52.4 KB STL | 3g $0.08 | 4g $0.08 | 8g $0.19 | Ensure proper orientation of parts, especially brakes, for correct assembly |
| Rims.stl | Printable file | 126.9 KB STL | 4g $0.10 | 5g $0.11 | 10g $0.24 | Ensure proper orientation of parts, especially brakes, for correct assembly |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
1st Gen Mazda 3 MPS / Mazdaspeed 3 Model
Shared by
Michael ChenDescription
This is a model of the 2009 mazdaspeed 3, or as we know it in europe, the 2009 Mazda 3 MPS. This is a stationary model. The wheels do not spin or turn. but feel free to remix and get something to work. The car has a length of 200mm and all other parts are made to fit at this size. so you might need to tweak the other parts if you want it smaller or bigger. The model consists of the car body itself, oem rims + tires, front and rear brakes, and 2 different sized axles to get a flush look. Assembly goes like this: Rims are glued into the tires, brakes into the rims, axles with the slim side into the backside of the brakes. When the glue is set just glue them into the wheel wells. Make sure the brakes are oriented correctly and the heights match.
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
