Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg ASA / PETG
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | ASA / PETG 20% | ASA / PETG 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Roof_Plug.stl | Primary model | 44.0 KB STL | 46g $1.10 | 50g $1.20 | 110g $2.63 | Print with the large flat surface on the bed platform for best results |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Mazda 3 Roof rack hole plug
Shared by
Michael ChenDescription
I lost the decorative plugs that cover the holes where roof racks attach to my 2005 BK Mazda 3. I modelled the one OEM plug I hadn't lost and 3D printed it in FDM on a Markforge in carbon fibre Onyx. I'm sure it would work with other materials but try to make it UV stabalised in some way. Perhaps Painting it would do the trick? They fit well if not a little tight. They don’t have an arrow on the top surface like on the OEM version. They print well upside down with the large flat surface on the bed platform.
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
