2000-2006 Honda Insight 1g Upper Radiator Bracket and Isolator - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ABS / with Nylon / Polycarbonate as alternatives 20%	PETG / ABS / with Nylon / Polycarbonate as alternatives 40%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

2000-2006 Honda Insight 1g Upper Radiator Bracket and Isolator

0 downloads34 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Replacement for the no longer available 1st gen Honda Insight upper radiator mount. The original was stamped aluminum with a rubber isolator bushing. Print the bracket at high infill in at least PETG/ABS. Nylon or polycarbonate would probably be better. Print the bushing in TPU. These parts will be tested and upgraded and issues posted here. Replaces Honda part numbers 74171-S3Y-000 (upper bracket with isolator) or 74173-SJ4-000 (isolator only).