Honda Civic IX Windshield Washer Fluid Cap - image

Files (5)

Honda_Cap_Normal.stl

STL

134.5 KB

Honda_Cap_Normal.stp

STP

8.6 KB

Honda_Cap_Tight.stl

STL

351.6 KB

Honda_Cap_Tight.stp

STP

8.6 KB

Honda_Cap_Tight_v2.stl

STL

418.7 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

5 model files

Typical selected file

22g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.52

Filament only at roughly $24/kg PETG / ASA

Print time

37m–1.0h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Honda_Cap_Normal.stl	Cover / cap	134.5 KB STL	13g $0.32	15g $0.35	32g $0.77	Use PETG / ASA; check sealing faces and verify in slicer.
Honda_Cap_Normal.stp	Cover / cap	8.6 KB STP	8g $0.20	9g $0.22	20g $0.47	Small functional file: print slowly; consider 80–100% infill for durability.
Honda_Cap_Tight.stl	Cover / cap	351.6 KB STL	19g $0.45	20g $0.48	44g $1.06	Use PETG / ASA; check sealing faces and verify in slicer.
Honda_Cap_Tight.stp	Cover / cap	8.6 KB STP	8g $0.20	9g $0.22	20g $0.47	Small functional file: print slowly; consider 80–100% infill for durability.
Honda_Cap_Tight_v2.stl	Cover / cap	418.7 KB STL	20g $0.48	22g $0.52	47g $1.13	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Honda Civic IX Windshield Washer Fluid Cap

5 downloads626 views0 likes

Need this part printed?

Tell us what you need and we'll help you get it 3D printed. Takes a minute — no account needed and no payment is collected.

Request print / quote

Opens a quick request form. No order is placed and no payment is collected. Prefer email? Email us instead.

Shared by

Alfred

Verified

Description

This is a washer fluid tank cap for Honda Civic IX, but maybe it will be OK for the other models. The Tight version version snaps pretty tight. The Normal version is with 0.2mm wider diameter. I have not testet it, but I think that it will be enough. EDIT (19.12.2017): Added Honda_Cap_Tight_v2.stl.