Honda Civic Key Housing w/trunk button cutout - image

Files (2)

Honda_key_bottom_v3.stl

STL

297.4 KB

Hondakeytopv3-with_trunk.stl

STL

1.3 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

34g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.82

Filament only at roughly $24/kg PETG / ASA

Print time

58m–1.6h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Honda_key_bottom_v3.stl	Printable file	297.4 KB STL	17g $0.42	19g $0.46	42g $1.00	Ensure proper orientation to minimize supports
Hondakeytopv3-with_trunk.stl	Printable file	1.3 MB STL	31g $0.75	34g $0.82	75g $1.80	Ensure proper orientation to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Honda Civic Key Housing w/trunk button cutout

1 downloads189 views0 likes

Shared by

Alfred

Verified

Description

This is WL_production's Honda Civic key repair part, but with another cutout on the other side for the trunk button on my '05 Civic Hybrid. Literally the only file I modified was the top portion, the bottom part is the same as his design at the time of this writing (late Feb 2017).