2001 Honda Civic Radiator Overflow Cap - image

Files (1)

Overflow_Cap.stl

STL

41.8 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

11g

Based on 25% main infill across listed model files

Material cost

$0.25

Filament only at roughly $24/kg PETG / ASA

Print time

18m–30m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Overflow_Cap.stl	Cover / cap	41.8 KB STL	10g $0.23	11g $0.25	23g $0.55	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

2001 Honda Civic Radiator Overflow Cap

0 downloads298 views0 likes

Shared by

Alfred

Verified

Description

This very simple design was made to replace a friends coolant overflow cap. Six months later, it's still working. (Please use with caution. The original cap was lost due to the car overheating. The radiator needed to be replaced. If yours is gone, it may be for an important reason!).