2005trailblazer.stl

STL

380.4 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

21g

Based on 25% main infill across listed model files

Material cost

$0.50

Filament only at roughly $24/kg PETG / ASA

Print time

35m–59m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
2005trailblazer.stl	Primary model	380.4 KB STL	19g $0.46	21g $0.50	46g $1.09	Ensure a smooth, even surface finish for a clean appearance.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

2005 trailblazer rear windows switch bezel

0 downloads417 views0 likes

Shared by

Verified

Description

was asked by a friend to duplicate a bezel for his trailblazer so using fusion this was as close as i could get it to the original.

Updated Jul 15, 2026

Originally published on thingiverse.com by Jason James (Rainkingfm) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.