Files (2)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| ROOF_CONSOLE_1.stl | Printable file | 489.8 KB STL | 21g $0.50 | 23g $0.55 | 50g $1.20 | Mounting requires stainless M4 machine screws and may need adjustment for a secure fit |
| ROOF_CONSOLE_2.stl | Printable file | 105.0 KB STL | 12g $0.30 | 14g $0.32 | 30g $0.71 | Mounting requires stainless M4 machine screws and may need adjustment for a secure fit |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
2006 Dodge Dakota Roof Console
Description
I remixed this slightly for my 2006 dodge Dakota. I had to shorten the body to make room for my factory dome light. It's mounted onto the headliner with stainless M4 machine screws. I also resized the switch holes for 20mm round rocker switches and spread them out slightly more. The 4th button on the far right is a momentary horn button for train horns I could have spent more time on this and painted it etc. But this truck isn't pretty anymore so I just sent it as printed. I did have to shape the sides by hand using a file to make it match the contour of the headliner. I didn't do the best job.
Compatible Cars
Originally published on thingiverse.com by Ian Moone (IanMoone89) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
