Dodge Ram 1500 Cell Phone Cradle - image

Files (2)

Stand.stl

STL

454.2 KB

stand_v2.stl

STL

518.9 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Stand.stl	Printable file	454.2 KB STL	Slice file	Slice file	Slice file	Ensure a clean and level print bed for optimal adhesion.
stand_v2.stl	Printable file	518.9 KB STL	Slice file	Slice file	Slice file	Ensure a clean and level print bed for optimal adhesion.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Dodge Ram 1500 Cell Phone Cradle

0 downloads187 views0 likes

Shared by

Michael Chen

Verified

Description

This is a phone cradle designed to mount in the upper storage tray of my Dodge Ram Pickup. I have a 2011 1500 SLT and have not tested this with any other year or trim of truck but this body style runs from 2009 - 2012 so it may fit others as well. I sized it to fill the tray so my Droid Turbo 2 with a case fits with room to spare. Stand v2 is 10mm wider to fit larger phones and has a 5° more angle to help it not fall back when accelerating. Pry up the tray liner and remove the two Torx screws underneath. Place the cradle so the two bottom protrusions fit into the pockets where the screws were. Remount the using two new 1 1/4 long screws.