2006 Ford Escape Sunvisor Anchor - image

Files (1)

VisorMount.stl

STL

907.2 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

29g

Based on 25% main infill across listed model files

Material cost

$0.70

Filament only at roughly $24/kg PETG

Print time

50m–1.4h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
VisorMount.stl	Mount / bracket	907.2 KB STL	27g $0.64	29g $0.70	64g $1.53	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

2006 Ford Escape Sunvisor Anchor

0 downloads398 views0 likes

Shared by

Alfred

Verified

Description

Buddy came to me with his daughter's Ford Escape, and it's broken sun visor. Somehow the mount had broken, the visor was loose, and laying on the floor. Armed with two beers of overconfidence, I sat down with Fusion 360, and in about 15 minutes had a model. I sent it off to the printer, and an hour later we had a working part in hand. It installed alarmingly smoothly - and to my buddy's credit - he rewarded us with a case of Mother Road Brewing Tower Station IPA. I don't know how it could get any better.