F150 (2009-2014) USB and Aux replacement - image

Files (1)

f150_USB_and_aux_hub.stl

STL

142.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
f150_USB_and_aux_hub.stl	Primary model	142.6 KB STL	Slice file	Slice file	Slice file	Ensure proper fitment with the aftermarket stereo and USB cord

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

F150 (2009-2014) USB and Aux replacement

0 downloads129 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a replacement for the sync module that has a usb and aux input for a 2009-2014 f150. Using this part along with this USB cord (https://amzn.to/2upzINH) you can replace the original for using an aftermarket stereo. This is also compatible with the hdmi / usb port as well. (https://amzn.to/2uogSGF) Printed in NylonX and the texture matches the stereo bezel.