Files (1)
Based on 100% main infill across listed model files
Filament only at roughly $24/kg PETG / ABS
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ABS 20% | PETG / ABS 100% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| F150_seat_realease_Part_1_of_2.stl | Primary model | 29.5 KB STL | 21g $0.50 | 50g $1.20 | 50g $1.20 | Print with high infill for strength and durability |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford F150 Rear Seat Release
Shared by
Michael ChenDescription
Ford F150 (2009+ Supercrew) and 2017+ Super Duty Crew Cab Rear seat release. The parts allow you to have your rear seat released with just a tug of the strap, instead of trying to reach for that small pin. I would recommend printing in PETG or ABS as PLA may have issues with the heat during the summer in the Truck. Installation requires the removal of the two torx screws, install, and then put the screws back in. Infill was at 100% for best strength, would not recommend any less. Works with 2015+ F-150 SuperCrew Cab Trucks.
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
