2008_honda_accord_rear_seat_mounting_clip.stl

STL

30.6 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

10g

Based on 25% main infill across listed model files

Material cost

$0.24

Filament only at roughly $24/kg PETG / ASA

Print time

17m–28m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
2008_honda_accord_rear_seat_mounting_clip.stl	Clip	30.6 KB STL	9g $0.22	10g $0.24	22g $0.52	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

2008 Honda Accord Rear Seat Mounting Clip

0 downloads51 views0 likes

Shared by

Verified

Description

Clip that holds the rear seat down to the seat shelf. 1 per side. Should fit all 8th gen Honda Accord.

Published Jun 28, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by (LuckyPants) · License: CC BY-SA

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.