Iphone5 Otterbox holder for Honda Accord - image

Files (2)

otterclamp4aligned.stl

STL

4.1 MB

hondaaccordholderV2.stl

STL

40.1 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
otterclamp4aligned.stl	Printable file	4.1 MB STL	Slice file	Slice file	Slice file	Ensure the print bed is level and clean for optimal adhesion
hondaaccordholderV2.stl	Mount / bracket	40.1 KB STL	Slice file	Slice file	Slice file	Ensure the print bed is level and clean for optimal adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Iphone5 Otterbox holder for Honda Accord

0 downloads234 views0 likes

Shared by

Michael Chen

Verified

Description

My 2005 Honda Accord Radio has stopped working (fairly common problem ), so I wanted something to hold my Iphone for music and GPS navigation. I originally printed it in PLA (white), but the hot sun in the closed car made it warp. I've reprinted in ABS (black) to see if it fares better I made the clip as one piece and the vent holder as another. This way the clip can be used for other applications. I just used nylon machine screws to combine them.