Honda Accord | 10th Gen Inner Trunk Lid Handle - image

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

0 model files

Recommended kit

—

Based on 25% main infill across listed model files

Material cost

$0.00

Filament only at roughly $24/kg PETG / ASA

Print time

—–—

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Honda Accord | 10th Gen Inner Trunk Lid Handle

0 downloads41 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I recently bought a brand new Honda Accord and was perplexed that it didn't come with a lid inside the trunk to pull it shut. Literally every cheap car I've owned had one, but apparently the engineers decided that even Honda's $38,000 Touring trim didn't need one. Instead of spending the money to buy one, I'll print one. This design slightly modifies the Honda design to give it a bit more grip area. Should fit all 9th and 10th gen accords (2014 - 2022). Will require cutting your trunk liner to install: https://www.youtube.com/watch?v=DqZPiDrYzpc Factory p/n: 84635-SEA-003ZF ---- CHANGELOG -v0.4 - 2020-11-29 Added reverse pull. This may still need some tweaking because forces change. Front clip may not be robust enough. - v0.3 - 2020-11-29 Elongated securing tab - v0.2 - 2020-11-28 Modified dimensions and extended handle. - v0.1 - 2020-11-27.