2008 Toyota Corolla Front Door Speaker Mounts - image

Files (3)

Front_Door_Speaker_Mount_-_20180102-2030.STL

STL

238.5 KB

Front_Door_Speaker_Mount_-_Bottom_-_20180102-2030.STL

STL

138.4 KB

Front_Door_Speaker_Mount_-_Top_-_20180102-2030.STL

STL

91.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Front_Door_Speaker_Mount_-_20180102-2030.STL	Mount / bracket	238.5 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal print quality and minimal supports
Front_Door_Speaker_Mount_-_Bottom_-_20180102-2030.STL	Mount / bracket	138.4 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal print quality and minimal supports
Front_Door_Speaker_Mount_-_Top_-_20180102-2030.STL	Mount / bracket	91.1 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal print quality and minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Panels

2008 Toyota Corolla Front Door Speaker Mounts

0 downloads34 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The factory speakers are made to the mounts which fit the door and are riveted in. I made these to fit standard aftermarket 6.5" speakers. Everything fit perfectly with no modifications. You will need some 2-2.5" rivets.