Speaker adapter for Corolla Cross - image

Files (2)

Speaker_NoSupport.stl

STL

1.6 MB

Speaker_withSupport.stl

STL

2.5 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Speaker_NoSupport.stl	Printable file	1.6 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer to minimize supports
Speaker_withSupport.stl	Printable file	2.5 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Panels

Speaker adapter for Corolla Cross

0 downloads58 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Adapter to use 5 inch aftermarket speakers in front doors of Toyota Corolla Cross. This have the holes to pass the wires and to use the original connector. you can remove the original connector from the original speakers and glue in this adapter. Please note that there are 2 versions: one without support and other with some printing supports that must be removed after printing. Tested with Hertz speakers, but should (in theory) fit other Toyota Models or some models of other japanese brands, like Subaru.