2009 Subaru Forester Cover Release - image

Files (2)

Subaru_Cover_Release_v2.stl

STL

108.4 KB

Subaru_Cover_Release_v2a.stl

STL

99.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Subaru_Cover_Release_v2.stl	Cover / cap	108.4 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Subaru_Cover_Release_v2a.stl	Cover / cap	99.8 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

2009 Subaru Forester Cover Release

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The cover, plug or insert is for the transmission release whole that is usually in the upper left of the automatic shifter in the Subaru Forester. It is very similar to the Outback (Part No: 35181AG00A) however the Outback part is about half the height of the Forester Cover Release. The Cover Release is individual sold for the Outback but in order to get it for the Subaru Forester you have to buy the whole shift indicator plate (Part No: 35170FG080) for the console. It costs anywhere between $80-$125 dollars.