Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| 2010ExpeditionGearSelector.stl | Primary model | 155.6 KB STL | 14g $0.34 | 15g $0.37 | 33g $0.80 | Ensure proper orientation to minimize supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
2010 Ford Expedition Gear Selector Thing
Description
This part broke on my 2010 Ford Expedition Shifter. At first, I thought it was the reason I couldn't remove my key. However, that is because of the switch that is supposed to go to an open state when you put the vehicle in park. Anyway, I took the time to reverse engineer the other plastic piece that was broken, and here is the result. You may have to rotate it to print it with supports a different way, and then drill out the spring and bearing holes.
Compatible Cars
Originally published on thingiverse.com by Dathan Alley (dathan-alley) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
