Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ABS 20% | PETG / ABS 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| mazda-power-tray.stl | Primary model | 330.6 KB STL | Slice file | Slice file | Slice file | Ensure proper fit around the 12V outlet and USB charging ports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
2011 Mazda 3 center console tray replacement
Print this part
Check the available model and saved setup details before opening your slicer.
Files
1 hosted model file
STL
Material
PETG or ABS
Print time
Slice to calculate
Filament
Slice to calculate
Supports
verify in slicer
Infill
20-30% infill for durability, with 1.2-1.6 mm walls
Difficulty
Not rated — inspect geometry
Vehicle heat
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This model replaces the portion of the center console tray that contains the 12V outlet. It adds holes for USB charging ports and a modular gap for a storage tray. The storage tray I modelled has spaces for pens/pencils and US quarters. This is not a thorough tutorial or a ready-to-go product and is provided only as a starting point for any tinkering you want to do with this component of the car. This project as I did it required these additional materials: USB charge board (I used a Coolgear Chargeit! USB-A/USB-C board ) 2-4 M3 screws for mounting the board Epoxy for attaching the board mounting tray. This could be eliminated by printing as one piece. 12V outlet (salvaged from the stock tray) 2 ~20-gauge butt splice connectors Some 20-gauge wire I spliced wires for the USB board onto the wires for the 12V outlet. This was tricky, they didn't leave a lot of extra wire to work with in there. Printing: Use ABS or PETG if can interior will get hot - PLA can warp severely in heat. Change log: v24: improved 12V plug fit.
Compatible Cars
Originally published on printables.com by BMacIntosh · License: Public Domain
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Mazda3 Console Cable Plug Cap Replacement
MX5 NB Centre Console Lid
Miata NB2 Console Lid Stay
Smartphone Dock for MX-5 NA Ashtray
1999 - 2000 NB1 Mazda Miata Console Hinge
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
