2012 Ford Focus (3rd gen) Parcel Shelf Latch - image

Files (1)

FocusParcelShelfPatchBackingPlateRight.stl

STL

701.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ABS 20%	PETG / ABS 25%	100% solid	Recommendation
FocusParcelShelfPatchBackingPlateRight.stl	Choose right variant	701.0 KB STL	Slice file	Slice file	Slice file	Use PETG / ABS, 4 walls, 25% infill. Pick the matching side before printing.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

2012 Ford Focus (3rd gen) Parcel Shelf Latch

0 downloads37 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

My 2012 Ford Focus parcel shelf hinge plastic pieces often get ripped out of the parcel shelf to the point that the parcel shelf is too worn for the plastic pieces to grab onto. I designed this piece to replace the inner (center) part of the hinge so that it has a wide surface to staple/stitch/sewn onto the (possibly worn) parcel shelf; and on the other hand facilitates the outer piece to clip onto. Since trunk interior can get pretty hot, please print in PETG or ABS. Since you can either staple, stitch or sewn the piece to the parcel shelf, no holes were made into the design. Please drill your own holes.