Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 90% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford Focus Cargo Cover Support Mount
Shared by
3DPrintedCarPartDescription
Not sure if this is a common problem, but when I bought my 2017 Ford Focus ST3 it was missing one of these mounts on the hatch that allows the cargo cover to be lifted with the hatch. Instead of sourcing the part from Ford, I decided to measure the dimensions off of the one that I had and make a 3D model. The parts are not identical, but the one that I have designed has a way tighter fit so it will not come out accidently. The strap also clicks onto it nicely. I choose to print mine with 100% infill and supports everywhere (takes just about 30 minutes). It came out very sturdy and you cannot tell that it is printed unless you thoroughly observe it (granted your print settings are dialed).
Compatible Cars
Originally published on thingiverse.com by Casey Barnett (thecaseybarnett) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
