Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| stereo_left.stl | Choose left variant | 92.1 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing. |
| stereo_right.stl | Choose right variant | 92.9 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
2012 Nissan Quest 2-Din Stereo Brackets
Shared by
3DPrintedCarPartDescription
These brackets allow mounting of a double-din car stereo in the dashboard of a 2012 (and possibly others) Nissan Quest minivan. One bracket is for the left side and one is for the right side. The brackets have front-facing panels which can be painted to match the dashboard color (or just print in black) which fill the gap between the dashboard opening and the sides of the stereo (Nissan factory stereo is wider than most aftermarket). Note that these brackets are designed for flat-sided aftermarket stereos with no step in from the width of the face to the width of the stereo inside the dash.
Compatible Cars
Originally published on thingiverse.com by Isaac (ivymike) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
