2013-2019 Ram 1500 iPhone Modular Dash Mount V.2 - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 75%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

2013-2019 Ram 1500 iPhone Modular Dash Mount V.2

0 downloads34 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Major revision - version 2. I put the original thru the rigors of testing and use. It was great. I wanted somthing a little less protruding and more ergonomic. I hope you like the new version! Print at.25 Print at >= 75% infill At these settings, even in the Florida heat on the dash of my truck, the print does not warp or sag. The weight of the print allow it to be a gravity and friction, from the toothed spindles, and doesn't move during driving. Assemble with crazy / gorilla glue. It is sized for an IPhone 6S Plus with a small surround case. If you have a different phone, post a remark with the size of the phone, with case, and I can post a resized cradle mount for your phone. 2019-08-30 - Added iPhone X S Max cradle and Samsung Note 10 cradle 2019-09-14 - Added base and spindle to be used with the 2019 and newer RAM trucks with the power outlet in the dash tray. The two files are added here and also added as a REMIX under the name: 2013-2019 Ram 1500 iPhone Modular Dash Mount V.3 2019-09-18 - RAM 2019 tray with power outlet base mount file uploaded: Version 2 - base - 2019 power outlet - 002. It can be used with the spindle "2019_Ram_Power_Outlet_Mount_-_004_-_spindle.stl".