2014 - 2018 Chevy Silverado / GMC Sierra Console Bin Cover - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA / / ABS 20%	PETG / ASA / / ABS 20%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

2014 - 2018 Chevy Silverado / GMC Sierra Console Bin Cover

0 downloads74 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

2014 - 2018 GMC Sierra Console Bin Cover. Covers the small bin below the radio as a false floor. Printed in PETG, but can also be printed in ABS, ASA, or Nylon A modifier was used to reduce the number of perimeters on the Logo to (1). This resulted in a better looking print. Hilbert curve was used for the top surface, for a more textured finish.(Attached picture does not show this) The Chevy logo used Octagram Spiral for the top surface of the logo. 20% Gyroid infill. Pretty PETG 3.5 4 layers top/bottom.