Files (1)

Sierra_Bin.stl

STL

38.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Sierra_Bin.stl	Primary model	38.2 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for stability if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

GMC Sierra Organizer

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is an organizer tray for the center console of a GMC Sierra with bucket seats 2019. I believe this is the same regardless of trim level and should be the same in 2020. I needed something to keep my misc stuff from sliding around in the small narrow section of the console. This is designed to hold chap stick, 3 cards, ice breakers container, air pods, and a small dust cloth. I'm sure it could be tweaked or used for other things as well.