Files (1)
Based on 90% main infill across listed model files
Filament only at roughly $24/kg ABS / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | ABS / ASA 20% | ABS / ASA 90% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Mazda3_2.5L_Air_Intake_Adapter_2.stl | Primary model | 454.2 KB STL | 20g $0.49 | 45g $1.08 | 49g $1.17 | Print with high infill to ensure the part's structural integrity |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
2014-2018 Mazda3 2.5L Air Intake Adapter
Description
This is a MAF adapter that allows you to convert your stock intake into a short ram intake, or helps you build a cold air intake! The only modification that I made to this design is that I removed the support bracket since I did not need it. This shaves hours off the print, especially with 100% infill and support. According to the original designer: This piece was created based on the CX-5 factory air box which include the MAF housing. It's on the thin side so print accordingly. I made a revision: Corrected some dimensions Added the bottom support for a 2D plate to be bolted Suggested to print in ABS at the maximum infill possible on your printer.
Compatible Cars
Originally published on thingiverse.com by Michael Yeh (myeh2k) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
