2014 Genesis Coupe Shift Knob for OEM Shifter - image

Files (1)

Genesis_Shift_Knob_OEM_w_Raised_Emblem_V1_0.STL

STL

250.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
Genesis_Shift_Knob_OEM_w_Raised_Emblem_V1_0.STL	Primary model	250.6 KB STL	Slice file	Slice file	Slice file	Use an M3 nut and an M3 X 6mm socket head cap screw to secure the shift knob

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

2014 Genesis Coupe Shift Knob for OEM Shifter

0 downloads37 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is part fits the OEM shifter for the 2014 Hyundai Genesis Coupe. I'm not sure if it fits the previous generation, let me know in the comments if you try it out. You'll need an M3 nut and an M3 X 6mm socket head cap screw to secure the shift knob.The nut is inserted into the slot in the bottom and held captive by the screw. I also partially filled the slot with epoxy to help keep the nut in place. I recommend using PETG, I originally tried PLA but the material is too soft and can't withstand the required torque for the cap screw.